designed in the u.s.a meets buy american provision under the american recovery and reinvestment act 2009 for projects requiring buy american provision certification, consult factory for additional information and special ordering details ite, caltrans, and california energy commission approved led signal modules and pedestrian signals
www.dialight.com all of the led traffic modules featured in this brochure are fully certified to the requirements of the state of californias appliance efficiency program. dialight is the first led signal module manufacturer to fully support these requirements and has received certification for both caltrans and ite approved products. according to the section in cec requirements entitled traffic signals for vehicle and pedestrian control all federally regulated traffic signals for vehicle and pedestrian control manufactured on or after january 1, 2006 shall have a nominal wattage and maximum wattage no greater than the values shown in table m-1, and shall be installed with the compatible electrically connected signal control interface devices and conflict monitoring systems. cec also has additional requirements for pedestrian signals that are not federally regulated. these requirements can be found in table m-2 of the cec requirements. for reference a copy of tables m-1 and m-2 from the cec requirements are shown below. california energy commission approved led traffic signal modules appliance maximum wattage (at 74c) nominal wattage (at 25c) traffic signal module type 12 - inch red ball 17 11 8 - inch red ball 13 8 12 - inch red arrow 12 9 12 - inch green ball 15 15 8 - inch green ball 12 12 12 - inch green arrow 11 11 pedestrian module type combination walking man/hand 16 13 walking man 12 9 orange hand 16 13 table m-1 standards for traffic signals for vehicle and pedestrian control appliance maximum wattage (at 74c) nominal wattage (at 25c) hand or dont walk sign or countdown 12 10 walking person or walk sign 12 9 table m-2 standards for signal modules for pedestrian control sold or offered for sale in the state of california ? allows for mounting in any orientation in the signal head ? industrys lowest power for all colors ? meets or exceeds intensity, color and uniformity specification ? temperature compensated power supplies for longer led life ? uniform appearance ? transient suppression exceeds ite and nema specifications (up to 6kv ring wave) ? manufactured with anti-capillary wires ? conformal coated power supply ? secondary lens treatment for abrasion resistance ? ite products are intertek/etl certified and listed on etl certification program website ? all units operate at 80-135vac rms, 603hz ite and caltrans approved led arrows part number color lens type typical wattage at 25oc dominant wavelength (nm) peak minimum maintained luminous intensity (cd) compliance cec approved 432-1314-001xod red tinted 6 628 56.8 ite, omnidirectional ? 432-1374-001xod red clear 6 628 56.8 ite, omnidirectional ? 431-3334-901xod yellow tinted 6 590 141.6 ite, omnidirectional ? 431-3374-901XOD yellow clear 6 590 141.6 ite, omnidirectional ? 432-2324-001xod green tinted 6 500 73.9 ite, omnidirectional ? 432-2374-001xod green clear 6 500 73.9 ite, omnidirectional ? 432-1314-001 red tinted 6 628 5,500 cd/m 2 caltrans ? 431-3334-001 yellow tinted 8 590 11,000 cd/m 2 caltrans ? 432-2374-001 green clear 7 500 11,000 cd/m 2 caltrans ?
? industrys lowest power for all colors ? meets or exceeds intensity, color and uniformity specification ? temperature compensated power supplies for longer led life ? uniform appearance ? expanded view radiation pattern suitable for span wire and steep grade applications ? transient suppression exceeds ite and nema specifications (up to 6kv ring wave) ? manufactured with anti-capillary wires ? conformal coated power supply ? secondary lens treatment for abrasion resistance ? patent no. 7,281,818 and other patents pending ? ite products are intertek/etl certified and listed on etl certification program website ? all units operate at 80-135vac rms, 603hz ite and caltrans approved uniform appearance led traffic signal modules www.dialight.com part number color lens type dominant wavelength (nm) typical wattage at 25 c peak minimum maintained luminous intensity (cd) compliance cec approved size (in) 433-1110-003xl red tinted 625 6 165 ite ? 8 433-1170-003xl red clear 625 6 165 ite ? 8 433-3130-901xl yellow tinted 590 7 410 ite ? 8 433-3170-901xl yellow clear 590 7 410 ite ? 8 433-2120-001xl green tinted 500 8 215 ite ? 8 433-2170-001xl green clear 500 8 215 ite ? 8 433-1110-003 red tinted 625 6 133 caltrans ? 8 433-3130-001 yellow tinted 590 9 267 caltrans ? 8 433-3170-001 yellow clear 590 9 267 caltrans ? 8 433-2120-001 green tinted 500 7 267 caltrans ? 8 433-2170-001 green clear 500 7 267 caltrans ? 8 433-1210-003xl red tinted 625 6 365 ite ? 12 433-1270-003xl red clear 625 6 365 ite ? 12 433-3230-901xl yellow tinted 590 12 910 ite ? 12 433-3270-901xl yellow clear 590 12 910 ite ? 12 433-2220-001xl green tinted 500 7 475 ite ? 12 433-2270-001xl green clear 500 7 475 ite ? 12 433-1210-003 red tinted 625 6 339 caltrans ? 12 433-3230-001 yellow tinted 590 12 678 caltrans ? 12 433-3270-001 yellow clear 590 12 678 caltrans ? 12 433-2220-001 green tinted 500 9 678 caltrans ? 12 433-2270-001 green clear 500 9 678 caltrans ? 12 part number color lens type dominant wavelength (nm) typical wattage at 25 c peak minimum maintained luminous intensity compliance cec approved p46-3r33-003 red clear 625 10 314 cd/m 2 caltrans ? p46-3y33-003 yellow clear 590 17 314 cd/m 2 caltrans ? p46-3b33-003 green clear 500 8 314 cd/m 2 caltrans ? ? direct replacement for incandescent lamps in programmable visibility (pv) signals ? compatible with mccain and 3m signal heads ? 90% reduction in power vs. incandescent lamps ? sealed lamp is moisture and dust resistant ? fuse and transient suppressor incorporated for line and load protection ? conformal coated power supply ? all units operate at 80 - 135vac rms, 60 3hz caltrans approved programmable visibility led signal modules
part number size description typical wattage @ 25oc min. luminance (cd/m 2 ) compliance cec approved hand person hand person 430-6450-001x 16 x 18 side-by-side hand and person 8 7 1,400 2,200 ite ? 430-6472-001x 16 x 18 overlay hand and person 8 6 1,400 2,200 ite ? 430-5770-001x 12 x 12 hand only 8 n/a 1,400 n/a ite ? 430-7771-001x 12 x 12 person only n/a 7 n/a 2,200 ite ? 430-6772-001x 12 x 12 overlay hand and person 8 6 1,400 2,200 ite ? 430-5570-001x 9 x 9 hand only 6 n/a 1,400 n/a ite ? 430-7570-001x 9 x 9 person only n/a 6 n/a 2,200 ite ? 430-6450-001xc 16 x 18 caltrans side-by-side 9 7 3,750 5,300 caltrans ? 430-6473-001 1 16 x 18 caltrans side-by-side 8 7 3,750 5,300 caltrans ? ? meets / exceeds ite uniformity ratio of not more than 1 to 5 between the max and min luminance values as measured in (.5) dia spots ? manufactured with anti-capillary wires ? conformal coated power supply ? fuse and transient suppressor incorporated for superior line and load protection ? independent dedicated power supplies for added safety and reliability ? ite products are intertek/etl certified and listed on etl certification program website ? transient suppression exceeds ite and nema specifications (up to 6kv ring wave) ? all units operate at 80-135vac rms, 603hz ite and caltrans uniform appearance hand and person pedestrian signals www.dialight.com dialight reserves the right to make changes at any time in order to supply the best product possible. the most current version of this document will always be available at: www.dialight.com/assets/brochures_and_catalogs/signaling/cec_brochure.pdf cec_brochure_a ? mutcd compliant for countdown applications ? full preemption compatibility ? up to 8 units can be connected in parallel without affecting the monitoring of the hand/person ? manufactured with anti-capillary wires ? three (3) independent dedicated power supplies for added safety and reliability ? ite products are intertek/etl certified and listed on etl certification program website ? conformal coated power supply ? improved optical design to provide superior uniform appearance of the icons ? transient suppression exceeds ite and nema specifications (up to 6kv ring wave) ? all units operate at 80-135vac rms, 603hz uniform appearance countdown pedestrian signals 1 430-6473-001is a pixilated product part number housing size symbol color typical wattage @ 25oc 2 min. luminance (cd/m2) compliance cec approved countdown hand person countdown hand person countdown hand person 430-6479-001x 16 x 18 portland orange portland orange lunar white 7 8 8 1,400 1,400 2,200 ite ? 430-6479-001xc 16 x 18 portland orange portland orange lunar white 9 10 9 3,750 3,750 5,300 caltrans ? 2 countdown power is with the digits 88 displayed
|
